日本免费A片一区二区三区四区,国产乡下三级全黄三级,飘雪在线观看视频

<bdo id="g3eop"><optgroup id="g3eop"><dd id="g3eop"></dd></optgroup></bdo>
<tbody id="g3eop"><span id="g3eop"></span></tbody>

    <div id="g3eop"></div>
    Consultation hotline:
    138-2697-3738
     Consultation hotline:138-2927-6169
    News Center
    Your location: Home>>News Center

    Types of parts suitable for machining center

    source: time:2019-10-18 18:10:46

    The machining center is suitable for the parts with complex processing, many working procedures, high requirements, various types of ordinary machine tools and many tool clamps, and can be processed only after multiple clamping and adjustment. The main objects of its processing are box type parts, complex curved surface, special-shaped parts, plate and sleeve type parts and special processing.

    (1) box type parts

    Box type parts generally refer to parts with more than one hole system, internal cavity and a certain proportion in the direction of length, width and height. This kind of parts are widely used in machine tools, automobiles, aircraft manufacturing and other industries. Box type parts generally need to carry out multi position hole system and plane processing, with high tolerance requirements, especially the shape and position tolerance requirements are relatively strict. They usually go through milling, drilling, expanding, boring, reaming, spot facer, tapping and other processes. They need a lot of cutting tools, are difficult to process on ordinary machine tools, have a large number of tooling sets, high cost, long processing cycle, and need to be clamped, aligned and measured manually for many times Because of the large number, the cutting tools must be changed frequently during machining. It is difficult to make the process and, more importantly, to ensure the accuracy.

    The horizontal boring and milling machining center is generally selected for the machining center of box type parts, when there are many machining stations and the parts can be completed only when the worktable rotates several times. When the number of processing stations is small and the span is not large, the vertical machining center can be selected to process from one end.

    (2) complex surface

    Complex curved surface plays an important role in mechanical manufacturing, especially in aerospace industry. It is difficult or even impossible to finish complex curved surface by common machining method. In our country, the traditional method is to use precision casting, so we can imagine that its precision is low. Complex curved surface parts such as various impellers, guide wheels, spherical surfaces, various curved surface forming dies, propellers of propeller and underwater vehicles, and some free-form surfaces of other shapes. These parts can be processed by machining center. The typical ones are as follows:

    ① cam and cam mechanism

    As the basic component of mechanical information storage and transmission, it is widely used in various kinds of automatic machines. Such parts include disc cams with various curves, cylindrical cams, conical cams, barrel cams, end cams, etc. According to the complexity of the cam, three-axis, four-axis linkage or five axis linkage machining center can be selected for machining such parts.

    ② integral impeller

    This kind of parts are commonly used in compressor of aeroengine, expander of oxygen making equipment, single screw air compressor, etc. for such a profile, it can be completed by a machining center with more than four axes linkage.

    Mold class

    Such as injection mold, rubber mold, vacuum forming blister mold, refrigerator foam mold, pressure casting mold, precision casting mold, etc. Using machining center to process mold, because the process is highly centralized, the finishing of key parts such as dynamic mold and static mold is basically to complete all machining contents in one installation, which can reduce the accumulated dimension error and repair workload. At the same time, the mold has strong repeatability and good interchangeability. The amount of work left by machining to the fitter is small. Where the tool is accessible, it should be done by machining as much as possible, so that the work of the die fitter mainly lies in polishing.

    Spherical surface

    Machining center milling can be used. The three-axis milling can only use the ball end milling cutter as the approach machining, which has low efficiency. The five axis milling can use the end milling cutter as the envelope surface to approach the spherical surface. When machining complex curved surface with machining center, the workload of programming is large, and most of them need automatic programming technology.

    (3) special-shaped parts

    Irregular parts are parts with irregular shape, most of which need multi station hybrid processing of point, line and surface. Generally, the rigidity of special-shaped parts is poor, the deformation of clamping is difficult to control, the machining accuracy is difficult to guarantee, and even some parts of some parts are difficult to be finished by ordinary machine tools. When machining with the machining center, reasonable technological measures shall be adopted, clamping once or twice, and multi working procedures or all working procedures shall be completed by using the characteristics of multi position point, line and surface mixed machining of the machining center.

    (4) plate, sleeve and plate parts

    With keyway, or radial hole, or hole system distributed on the end face, curved disk sleeve or shaft parts, such as shaft sleeve with flange, shaft parts with keyway or square head, etc., and plate parts with more hole processing, such as various motor covers, etc. The vertical machining center should be selected for the disk parts with distributed hole system and curved surface on the end face, and the horizontal machining center should be selected for the parts with radial hole.

    (5) special processing

    After mastering the function of the machining center, with certain tooling and special tools, the machining center can be used to complete some special process work, such as lettering, marking and pattern carving on the metal surface; the main shaft of the machining center is equipped with a high-frequency EDM power supply, which can scan the metal surface for surface hardening; the machining center is equipped with a high-speed grinding head, which can achieve small size Grinding of module involute bevel gear and grinding of various curves and surfaces, etc.


    Last article:第一篇

    Next article:Machining requirements for precision parts

    Return

    国产蝌蚪视频在线观看,亚洲av无码一区东京热,日本到AV免费一区二区三区 少妇激情av一区二区 久久国产亚洲欧美久久 国产在线精品亚洲一品区 日韩中文无码有码免费视频 国内揄拍国内精品对白86 视频一区中文字幕日韩专区 国产乱子伦在线观看 亚洲色偷偷色噜噜狠狠99 18禁黄网站禁片无遮挡观看 国产精品一在线观看 日韩欧美亚洲每日更新在线 日韩精品电影综合区亚洲 免费国产黄线在线播放 精品久久久久久久中文字幕 欧美成人性生免费看的 少妇人妻系列无码专区视频 欧美白人最猛性xxxxx 免费特级毛片 日韩毛片免费看不卡 免费国产a国产片高清网站
    亚洲综合色一区二区三区 中文字幕被公侵犯的漂亮人妻 人妻互换免费中文字幕 高效天堂BT在线WWW 久久亚洲天天做日日做 欧美色欧美亚洲另类二区 40岁成熟女人牲交片20分钟 日本乱中文字幕系列 久久久精品国产免费观看 综合图区亚洲偷窥白拍 日本久久高清免费观看 国产亚洲日韩欧美看国产 xyx性爽欧美 八戒八戒电影免费观看 久久超碰国产精品最新 日本一道高清一区二区 最近更新中文字幕2019国语 天堂资源最新版中文 亚洲国产精品综合久久2007 丰满日韩放荡少妇无码视频 日日日日做夜夜夜夜做无码 久久WWW免费人成_看片中文 99久久国产精品免费 人xxxx性xxxxx欧美 日本三级韩国三级美三级 337p粉嫩大胆噜噜噜 欧美最猛性xxxxx潮喷 久久综合给合久久国产免费 国产av午夜精品一区二区三 久久WWW免费人成_看片中文 人妻无奈迎合粗大 国产精品自在拍首页视频8 午夜伦4480yy私人影院免费 嫖农村40的妇女舒服正在播放 久久精品中文字幕一区 日本熟妇色视频WWW 日韩AV在线一区免费超清 五月丁香六月综合欧美网站 国产三级精品三级在专区 92国产精品午夜福利 狠狠狠的在啪线香蕉亚洲 天天干夜夜操 最新国产一卡二卡三卡四卡 狠狠五月激情六月丁香 免费精品国偷自产在线 久久99九九精品久久久久齐齐 国产成人精品亚洲日本语言 欧美牲交a欧美牲交 久热香蕉在线视频免费 国产亚洲欧美在线专区